Pacific Digital Digital Pacific USB Digital Photo Frame MemoryFrame - Manual (Page 29)

MemoryFrame User’s Manual
Copyright© 2002 Pacific Digital Corporation
Page 26
First open the show you want to send on the PC. From the
“MemoryFrame” pull-down menu of Digital PixMaster, select
Send-Slideshow. This function is also available by clicking on
“send-slideshow” icon ( ) in the toolbar. This will send your PC
slideshow to the MemoryFrame. When the application sends the
Send-Slideshow command, the MemoryFrame will erase its current
slideshow, then read in the new show over the USB connection
from the PC and save it into its onboard memory.
After you click on Send, Digital PixMaster will display a progress
bar to indicate the transfer of the new images to MemoryFrame.
Important! When the progress bar is complete, it only signifies that the
file has been transferred, but not yet stored in memory. This is just the
beginning of the MemoryFrame’s actual process of updating its
Slideshow, so do not turn off the power
After the transfer is complete, the MemoryFrame will erase the
current slideshow portion of its memory and program in the new
slideshow image. You must wait up to one (1) minute for the frame
to complete the slideshow change.
Important! Do not unplug or cut power to the MemoryFrame or PC
during the send slideshow process!
Once the new slideshow has been loaded into the MemoryFrame’s
storage memory, the MemoryFrame will indicate it is done by
displaying the first new image of the slideshow. A power-cycle is
not required.
6.7 Exiting Digital PixMaster
Choosing Exit from the File menu will exit the Digital PixMaster
program. If you have an unsaved slideshow file currently open, the
program will ask you if you want to save it before exiting the program.
Clicking on the close window box (x) in the upper right corner will also
exit the Digital PixMaster program.