Philips CE132 - Manual (Page 16)

14 EN
Use alternate frequencies
If the signal of an RDS station is poor, enable
the AF (Alternate Frequency) function to search
for another station that broadcasts the same
program.
1
Press and hold to access the system
menu.
2
Press / repeatedly until [AF ON] or
[AF OFF] is displayed.
3
Rotate to select a setting.
• [AF ON]: Enable the AF function.
• [AF OFF]: Disable the AF function.
Set the region for AF tuning
You can set the region for AF tuning.
1
Press and hold to access the system
menu.
2
Press / repeatedly until [REG ON]
or [REG OFF] is displayed.
3
Rotate to select a setting.
• [REG ON]: Only RDS stations in
current region can be tuned to
automatically.
• [REG OFF]: All RDS stations can be
tuned to automatically.
Receive traffic announcement
If you want to receive traffic announcement,
enable the TA (Traffic Announcement) function.
1
Press and hold to access the system
menu.
2
Press / repeatedly until [TA ON] or
[TA OFF] is displayed.
3
Rotate to select a setting.
• [TA ON]: When a traffic
announcement is on air, the system
automatically switches to the tuner
mode and begins to broadcast the
traffic announcement. When the traffic
announcement is over, the system
returns to the previous mode.
• [TA OFF]: Traffic announcement does
not cut in.
Tip
•
When a traffic announcement cuts in, you can press
to switch the system to the previous mode.
Synchronize the system clock
You can synchronize the system clock with an
RDS station that transmits time signals.
1
Press and hold to access the system
menu.
2
Press / repeatedly until [CT ON]
or [CT OFF] is displayed.
3
Rotate to select a setting.
• [CT ON]: Synchronize the
system clock with the RDS station
automatically.
• [CT OFF]: The automatic clock
synchronization with RDS station is
disabled.
Tip
•
The accuracy of time depends on the RDS station that
transmits time signals.