Pentax Optio MX4 - Manual (Page 11)

9
5
Click [Finish].
Reboot your computer after the screen closes.
6
Turn your camera off and plug the provided USB cable
into your camera and into an available USB port on your
computer.
7
Turn your camera on.
Your computer will automatically detect the camera as new
hardware and window will display a notification confirming
[Hardware Found : PENTAX OPTIO MX4] (Windows XP) or
[Search for the best driver for your device (Recommended)]
(Windows 98/98SE/Me/2000) in the task bar recognized area to
begin the installation.
8
Double-click [My Computer] on the desktop.
When the installation is completed, your camera can then be found
in the [My Computer] window as [Removable Disk].
Make sure that [Removable Disk] is displayed in the [My computer]
window.
Confirm that the USB Connection mode is set to [PC] before
connecting the USB cable. (1p.16)
In the case of Windows XP, if the SD Memory Card has a volume
label attached, the volume label name will be displayed instead of
[Removable Disk]. If the SD Memory Card is new and has not been
formatted, the manufacturer and model number may be displayed.