Pentax Optio MX4 - Manual (Page 10)

8
This section describes the procedures for installing the USB driver
and the necessary software.
1
Turn on your computer.
2
Insert the CD-ROM (S-SW23) into your CD-ROM drive.
The PENTAX Software Installer screen is displayed on the
desktop.
3
Click your applicable
language.
You can choose the languages from
the displayed screen.
A selection screen to install your
desired software is displayed.
4
Click [USB Driver] on the
Software Installer screen.
The InstallShield Wizard screen will
appear.
Follow the instruction on the screen.
Complete InstallShield Wizard
screen will appear.
Installing the USB Driver and the Software (for
Windows)
Installing the Image Processing Software (ACDSee for PENTAX) 1p.10
Installing the USB Driver (Windows 98/98SE only)
• If the PENTAX Software Installer screen does not appear
Display the PENTAX Software Installer screen following the steps
below.
1) Double-click [My Computer] on the desktop.
2) Double-click the [CD-ROM Drive (S-SW23)] icon.
3) Double-click [Setup.exe].