Lanier GX3050 - Manual (Page 165)

162
Printing
4. Load inkjet transparency into tray 1 with the notched corner in the right front corner of the tray.
Curled inkjet transparency may jam. Straighten any curls before loading.
If other paper is loaded, remove it, and then load inkjet transparency.
To prevent the leading edge of transparencies from being scratched, place transparencies one at a time.
5. Squeeze the front end paper guide, and then slide it to meet the edge of the inkjet transparency.
6. Push tray 1 gently in until it stops.
7. Lower the output tray.