beautypg.com

Linksys SRW2016 User Manual

Page 17

background image

8

Chapter 3: Connecting the Switch
Connecting the Switch

16- or 24-Port 10/100/1000 Gigabit Switch with WebView

8. Power on the network devices connected to the Switch. Each active port’s corresponding Link/Act LED will

light up on the Switch. If a port has an active Gigabit connection, then its corresponding Gigabit LED will also
light up.

If you will use the Switch’s console interface to configure the Switch, proceed to “Chapter 4: Using the Console

Interface for Configuration” for directions.

If you will use the Switch’s Web-based Utility to configure the Switch, proceed to “Chapter 5: Using the Web-

based Utility for Configuration.”