Life Fitness G4 - Manual (Page 11)

10
S TEP 6:
• SECURELY assemble the LEFT (D) and RIGHT (E) BOOM PLATES to the FRAME (A) using two
3/8 X 3-3/4” BOLTS (6) and two 3/8” SILVER LOCK NUTS (19). See FIGURE 6.
• Slide up both SHAFT COLLARS (29) to the top until flush with the bottom of the guide rod bush-
ings in both the LEFT (M) and RIGHT (N) REAR UPRIGHTS and SECURELY TIGHTEN as
shown in FIGURE 6.
N
E
D
M
AC
A
F
IGURE
6