Lantronix XPress DR+ - Manual (Page 60)

Chapter 6: Configuration Using Web Manager
XPress DR+ User Guide 60
Figure 6-9. WLAN Settings – Infrastructure Network Type
2. Enter or modify the following fields:
Wireless Network Configuration
Network Name (SSID) Enter the name of the wireless network (SSID). The XPress
DR+W connects to this wireless network.
Network Type Select Infrastructure or Ad Hoc. The default setting is Ad
Hoc. Network type is also referred to as the network topology.
Channel Configurable only when Network Type is Ad Hoc. Select
from the pull-down menu the radio channel for the Ad Hoc
network. The default value is 11.