Using this guide, Purpose and audience, Summary of chapters – Lantronix XPress DR+ User Manual
Page 10: Chapter 1: using this guide
XPress DR+ User Guide
10
Chapter 1: Using This Guide
Purpose and Audience
This manual describes the Lantronix XPress DR+ and XPress DR+W device servers.
These device servers are members of the XPress family that work with Industrial
Automation Protocols. The XPress DR+ W has wireless as well as wired capability.
This guide provides the information needed to configure, use, and update the XPress
DR+ device servers. It is for system administrators and those responsible for installing
and maintaining these device servers.
Summary of Chapters
The remaining chapters in this guide include:
Chapter
Description
Describes the main features of the XPress DR+ and the
protocols it supports.
Chapter 3: Installation and
Hardware
Describes the unit's interfaces and power requirements.
Provides instructions for physically connecting the unit.
Describes the XPress DR+W and how to install and
configure the unit initially.
Chapter 5: Using DeviceInstaller
Provides information for getting your unit up and running,
using DeviceInstaller to assign an IP address.
Chapter 6: Configuration Using
Web Manager
Details using the Web Manager to set parameters such
as port and server properties.
Chapter 7: Configuration Using
Telnet or Serial Port (Setup
Mode)
Provides instructions for accessing Setup Mode
(command line interface) using a Telnet connection
through the network or a terminal or terminal emulation
program through the serial port.
Chapter 8: Setup Mode: Server
Configuration
Details the network (server) settings
Chapter 9: Setup Mode:
Channel Configuration
Details the serial port settings.
Chapter 10: Setup Mode:
Advanced Settings
Details email, expert, and security settings and explains
how to reset the unit to factory default values.
Provides instructions for obtaining the latest firmware and
updating the XPress DR+.
Provides instructions for accessing and using the
command line interface for monitoring the network and
diagnosing problems.