Lantronix XPress DR+ - Manual (Page 5)

Contents
XPress DR+ User Guide 5
Server Configuration ________________________________________________ 48
Host List Configuration_______________________________________________ 50
Channel Configuration _______________________________________________ 51
Serial Settings _________________________________________________________ 51
Connection Settings - TCP________________________________________________ 54
Connection Settings - UDP _______________________________________________ 56
WLAN Configuration (XPress DR+W only) _______________________________ 58
Applying Settings ___________________________________________________ 62
Applying Factory Defaults ____________________________________________ 62
Chapter 7: Configuration Using Telnet or Serial Port (Setup Mode) 63
Accessing Setup Mode ______________________________________________ 63
Telnet Connection ______________________________________________________ 63
Serial Port Connection ___________________________________________________ 64
Exiting Setup Mode _________________________________________________ 65
Chapter 8: Setup Mode: Server Configuration 66
Server Configuration (Option 0) ________________________________________ 66
Network Mode (XPress DR+W only) ________________________________________ 66
IP Address ____________________________________________________________ 66
Set Gateway IP Address _________________________________________________ 67
Netmask: Number of Bits for Host Part ______________________________________ 67
Change Telnet Configuration Password _____________________________________ 68
DHCP Name ______________________________________________________ 68
Chapter 9: Setup Mode: Channel Configuration 69
Channel 1 (Option 1) and Channel 2 (Option 2) ___________________________ 69
Baudrate _________________________________________________________ 69
I/F (Interface) Mode _________________________________________________ 70
Flow _____________________________________________________________ 71
Port Number_______________________________________________________ 71
Connect Mode _____________________________________________________ 72
a) Incoming Connection __________________________________________________ 73
b) Response ___________________________________________________________ 73
c) Active Startup ________________________________________________________ 73
d) Datagram Type ______________________________________________________ 75
e) Modem Mode ________________________________________________________ 75
Send the Escape Sequence (+++) in Modem Mode ________________________ 78
Auto Increment Source Port___________________________________________ 78
Remote IP Address _________________________________________________ 78