Lantronix cables and adapters, Appendix b: lantronix cables and adapters, Appendix b – Lantronix XPress DR+ User Manual
Page 105
XPress DR+ User Guide
105
Appendix B: Lantronix Cables and Adapters
Lantronix P/N Description
Applications
500-103
6’ RJ45-to DB9F
Included with XPress DR+ for setup or device
connectivity.
Connects the RJ45 RS232 serial ports of XPress DR+ to
a DB9M DTE interface of a PC or serial device.
200.2062
Cable Ethernet CAT5; RJ45, 2 m (6.6 ft)
Connects the XPress DR+ Ethernet ports to an Ethernet
switch/hub or is used for cascading from one XPress
DR+ to another.
Connects the XPress DR+ serial RJ45 RS232 ports to a
device using one of the adapters listed below.
200.2063
Cable Ethernet CAT5; RJ45, 5 m (16.4 ft)
Connects the XPress DR+ Ethernet ports to an Ethernet
switch/hub or is used for cascading from one XPress
DR+ to another.
Connects the XPress DR+ serial RJ45 RS232 ports to a
device using one of the below listed adapters.
200.2064
Cable Ethernet CAT5; RJ45, 10 m (32.8 ft)
Connects the XPress DR+ Ethernet ports to an Ethernet
switch/hub or is used for cascading from one XPress
DR+ to another.
Connects the XPress DR+ serial RJ45 RS232 ports to a
device using one of the adapters listed below.
200.2065
Cable Ethernet CAT5; RJ45, 15 m (49.2 ft)
Connects the XPress DR+ Ethernet ports to an Ethernet
switch/hub or is used for cascading from one XPress
DR+ to another.
Connects the XPress DR+ serial RJ45 RS232 ports to a
device using one of the adapters listed below.
200.2066A
Adapter RJ45-to-DB25M
Allows a standard straight-pinned CAT5 cable to connect
the XPress DR+ RJ45 serial ports to the DB25F DCE
interface of a serial device.
200.2067A
Adapter RJ45-to-DB25F
Allows a standard straight-pinned CAT5 cable to connect
the XPress DR+ RJ45 serial ports to the DB25M DTE
interface of a serial device.
200.2069A
Adapter RJ45-to-DB9M
Allows a standard straight-pinned CAT5 cable to connect
the XPress DR+ RJ45 serial ports to the DB9F DCE
interface of a serial device.
200.2070A
Adapter RJ45-to-DB9F
Allows a standard straight-pinned CAT5 cable to connect
the XPress DR+ to the DB9M DTE interface of a PC or
serial device.