Lanier 5613 User Manual

Page 62

Troubleshooting

DDDD

While pressing the release lever,
adjust the side fences.

EEEE

Push the metal plate down, and
then square the paper and load it
in the tray.

Important

❒ Do not stack paper over the lim-

it mark.

❒ Load paper so that the paper

touches the right side of the
tray, or misfeeds might occur.

Note

❒ Shuffle the paper before loading

it in the tray.

FFFF

Adjust the side and back fences to
the new paper size.

Important

❒ When loading small quantities

of copy paper, be careful not to
squeeze in the side fence too
much or paper will not be fed
properly.

GGGG

Push the paper tray in until it
stops.

Note

❒ Select the new paper size with

the User Tools. See p.51 “Select-
ing the Paper Size with the User
Tools”.

StellaC-EN-CopyF_V4_FM.book Page 50 Wednesday, July 4, 2001 11:23 AM