Lanier 5613 - Manual (Page 43)

Other Functions
31
2
Other Functions
User Codes
When user codes are set, operators
must enter their user codes before the
machine can be operated. The ma-
chine keeps count of the number of
copies made under each user code.
Note
❒ When user codes are set, the ma-
chine will prompt you for your
user code after the power switch is
turned on or Copy Reset Timer
comes into effect.
❒ To prevent others from making
copies using your user code, press
the
{{{{Clear Modes}}}} and {{{{Clear/Stop}}}}
keys simultaneously after copying.
Reference
For details about user codes, see
p.56 “Settings You Can Change
with the User Tools”.
Setting the User Code
AAAA
Press the {{{{User Tools/Counter}}}} key.
BBBB
Press the
0 0 0 0 or 1 1 1 1 key to display
“3. Copier Features”, and then
press the
{{{{OK}}}} key.
CCCC
Press the
0 0 0 0 or 1 1 1 1 key until “7.
Key Op. Tools” is displayed, and
then press the
{{{{OK}}}} key.
DDDD
Press the
0 0 0 0 or 1 1 1 1 key until “7.
Program User Code” is displayed,
and then press the
{{{{OK}}}} key.
EEEE
Enter the desired user code with
the number keys, and then press
the
{{{{OK}}}} key.
Auto Start
If you press the {{{{Start}}}} key during the
warm-up period, the
{{{{Start}}}} key will
blink and your copies will be made as
soon as warm-up finishes.
AAAA
Make any adjustments to copy set-
tings during the warm-up period.
BBBB
Place your originals.
CCCC
Press the {{{{Start}}}} key.
The
{{{{Start}}}} key indicator flashes
green.
Note
❒ To cancel Auto Start, press the
{{{{Clear/Stop}}}} key.
StellaC-EN-CopyF_V4_FM.book Page 31 Wednesday, July 4, 2001 11:23 AM