Lexmark 258x - Manual (Page 59)

Bar Code
2-39
Draft document
Barcode Module Width
The suggested values for m are as follows:
Adjustment Unit
24 wire printers (259X) 1=1/360 in.
9 wire printers (258X) 1=1/240 in
180 B4 CODE 39
181 B5 INDUSTRIAL 2 of 5
182 B6 INTERLEAVED 2 of 5
183 B7 UPC-A
184 B8 UPC-E
185 B9 POST-NET (barcode)
186 BA CODE 128
Table 2-18: Barcode Module Width
m
Unit Module
Dots
Width
Decimal Hexadecimal (259X) 24 wire (258X) 9 wire
0 00 default (2 dots) 0.015 in. 0.021 in.
1 * 01* 2 dots 0.012 in. 0.017 in.
2 02 2 dots 0.015 in. 0.021 in.
3 03 3 dots 0.021 in. 0.030 in.
4 04 4 dots 0.026 in. 0.038 in.
Notes:
* When m = 1, human readable flag is always ignored, and its character is not printed.
In case of "Post-Net", this value only affects bar-width and does not affect bar-pitch.
When m = 1, the barcode prints by 1/360 or 1/240 full dot method. For all other values, the barcode prints by half dot method.
Module width values are nominal values.
Table 2-17: Barcode Types (Continued)
Decimal Hexadecimal Barcode