Liebert 130 kVA - Manual (Page 91)

User Manual
Hipulse - Single Phase ‘1+N’ UPS System 130 kVA - 110V
71
Chapter 9
Specification
This specification describe requirements for an Uninterruptible Power System (UPS).
9.1 Conformity and Standard
The UPS has been designed to conform the following standards: IEC, EN
9.2 UPS Environmental
The UPS shall be able to operate under the following environmental conditions without
damage or degradation in electrical operating characteristics:
Environmental Characteristics Units
Rated Power kVA 130
Operating Temperature ºC 0 to 45 ºC
Relative Humidity % = 90% at 31 ºC, Saliferrous, Humid
Altitude of operation m = 1000m above sea level
Storage/ transport temperature ºC -25 to 70 ºC
9.3 UPS Mechanical Characteristics
Mechanical
Characteristics Units
130 kVA
6 pulse
Height mm 1900
Width mm 1400
Depth mm 925
Ventilation - By internal intake fans
Cable entry - Bottom
Protection IP 41