Linksys RV082 User Manual
Page 66
57
Chapter 6: Set Up and Configure the Router
Wizard Tab
10/100 8-Port VPN Router
If you chose Obtain an IP automatically, Figure 6-56 appears. Select Use DNS Server provided by ISP
(default) or Use the Following DNS Server Addresses, if you want to enter a specific IP. Click Next to
continue. Click Previous if you want to return to the previous screen. Click Exit if you want to exit the wizard.
If you chose Static IP, Figure 6-57 appears. Enter the Static IP, Subnet Mask, and Default Gateway
provided by your ISP. Click Next to continue. Click Previous if you want to return to the previous screen. Click
Exit if you want to exit the wizard.
If you chose PPPoE, Figure 6-58 appears. Enter the User Name and Password provided by your ISP. Click
Next to continue. Click Previous if you want to return to the previous screen. Click Exit if you want to exit the
wizard.
6. The next screen, Figure 6-59, is for selecting the WAN (or Internet) Connection Type for your WAN2 port when
using it as a WAN (or Internet) port. Select Obtain an IP automatically, Static IP, or PPPoE, depending on which
type is used by your ISP. Click Next to continue. Click Previous if you want to return to the previous screen.
Click Exit if you want to exit the wizard.
7. The next screen that appears depends on your WAN (or Internet) Connection Type selection for your WAN2
port.
If you chose Obtain an IP automatically, Figure 6-60 appears. Select Use DNS Server provided by ISP
(default) or Use the Following DNS Server Addresses, if you want to enter a specific IP. Click Next to
continue. Click Previous if you want to return to the previous screen. Click Exit if you want to exit the wizard.
If you chose Static IP, Figure 6-61 appears. Enter the Static IP, Subnet Mask, and Default Gateway
provided by your ISP. Click Next to continue. Click Previous if you want to return to the previous screen. Click
Exit if you want to exit the wizard.
If you chose PPPoE, Figure 6-62 appears. Enter the User Name and Password provided by your ISP. Click
Next to continue. Click Previous if you want to return to the previous screen. Click Exit if you want to exit the
wizard.
8. The final screen that appears is Figure 6-63. If you don’t need to make any changes click Save Settings.
Click Previous if you want to return to the previous screen. Click Exit if you want to exit the wizard.
Figure 6-56: Obtain an IP Automatically
Figure 6-57: Static IP
Figure 6-58: PPPoE