Linksys RV082 - Manual (Page 43)

34 Chapter 6: Set Up and Configure the Router
LAN Management Tab - LAN Setup
10/100 8-Port VPN Router
LAN Management Tab - LAN Setup
In this Router, users can configure the connection status for each port, such as Priority, Speed, Duplex and Auto
Negotiation. See Figure 6-34.
Basic Per Port Config.
Disable: Check the box, the port will be disabled. It is a per-port setting.
Priority: Select High or Normal for Port-based QoS (Quality of Service). QoS is used to maximize a network’s
performance and this setting allows you to prioritize performance on eight LAN ports.
Speed: Users can manually configure the per-port speed as 10Mbps or 100Mbps.
Duplex: Users can manually configure the per-port duplex as half-duplex or full-duplex.
Auto Negotiation: If enabled, every LAN port will be set as auto negotiated. Users will not need to set up speed
and duplex.
Click the Save Settings button to save the LAN Port settings or click the Cancel Changes button to undo your
changes.
LAN Management Tab - LAN Status
Users can choose the port number from the pull down menu to see the status of the selected port. See Figure
6-35.
The Summary table will show the setting for the selected port, such as Type, Link Status (up or down), Port
Activity (Enabled or Disabled), Priority (High or Normal), Speed Status (10Mbps or 100Mbps), Duplex Status (Half
or Full), Auto negotiation (Enabled or Disabled).
The Statistics table will show the port receive/transmit packet count/packet byte count and Port Packet Error
Count of the selected port. Click the Refresh button to refresh the port status.
Figure 6-33: Save File
Figure 6-34: LAN Setup
Figure 6-35: LAN Status