Linksys RV082 - Manual (Page 65)

56 Chapter 6: Set Up and Configure the Router
Wizard Tab
10/100 8-Port VPN Router
Wizard Tab
Use this tab to access two Setup Wizards, the Basic Setup Wizard and the Access Rule Setup Wizard. They will
help you to set up the Router to access the Internet and set up a Firewall security policy. The wizard will guide
you through a series of menus to configure your Router. See Figure 6-52.
Basic Setup
1. Click the Launch Now button to run the Basic Setup Wizard to quickly set up the Router to access the
Internet.
2. The first screen that appears is Figure 6-53. Choose whether the WAN2 (DMZ/Internet) port will be used as a
WAN (Internet) port or DMZ port. Select Dual WAN to use the port as a WAN port or select DMZ to use the port
as a DMZ port. Click Next to continue. Click Exit if you want to exit the wizard.
3. The next screen is Figure 6-54. Your Internet Service Provider (ISP) may require a host and domain name. If
your ISP requires them, enter the Host Name in the field, and the Domain Name in the field. Click Next to
continue. Click Previous if you want to return to the previous screen. Click Exit if you want to exit the wizard.
4. The next screen, Figure 6-55, is for selecting the WAN (or Internet) Connection Type for your WAN1 (Internet)
port. Select Obtain an IP automatically, Static IP, or PPPoE, depending on which type is used by your ISP. Click
Next to continue. Click Previous if you want to return to the previous screen. Click Exit if you want to exit the
wizard.
5. The next screen that appears depends on your WAN (or Internet) Connection Type selection for your WAN1
port.
Figure 6-52: Wizard
Figure 6-53: Dual WAN or DMZ
Figure 6-54: Host and Domain Name
Figure 6-55: WAN Connection Type