beautypg.com

Lenovo 5046 User Manual

Page 38

background image

Figure 25. Installing the power supply assembly

9. Connect the new power supply assembly cables to all drives and the system board. See “Locating

parts on the system board” on page 9.

10. Lower and position the heat sink fan duct on the top of the heat sink and fan assembly until the two

screw holes in the heat sink fan duct are aligned with those in the heat sink and fan assembly. Install
the two screws to secure the heat sink fan duct.

Figure 26. Installing the heat sink fan duct

What to do next:

• To work with another piece of hardware, go to the appropriate section.

• To complete the replacement, go to “Completing the parts replacement” on page 40.

30

ThinkCentre User Guide

This manual is related to the following products: