Liebherr HC1050 - Manual (Page 9)

A delight in freshness
HC 1001 / HC 1050
4
82-5/8 IN.
MAX.
(2100mm)
KIKB001
Figure 2
The power cord is equipped with a three-prong
(grounding) plug for your protection against
possible shock hazards. To maintain this protection:
●
Do not modify the plug by removing the round
grounding prong.
●
Do not use a two-prong adapter. Where a two-
prong wall receptacle is encountered, contact
a qualified electrician and have it replaced with
a three-prong receptacle in accordance with all
local codes and ordinances.
●
Do not use a power cord that is frayed or
damaged.
Electrical Safety
Connect this appliance to a 110-120 VAC, 15 amp
circuit that is controlled by a circuit breaker or fuse.
In some communities, a wall switch is required
to turn power to the appliance OFF and ON. This
appliance should have its own separate grounded
circuit. Do not use an extension cord.
The top of the electric outlet must be located within
82-5/8 in. (2100 mm) (Figure 2) from the top of the
base in the cabinet.
I
NSTALLATION
G
UIDELINES