Linksys WDT11 - Manual (Page 28)

PCI Adapter
49
Instant Wireless TM Series
48
2. The following screen should appear. You will be prompted to enter an SSID
value in the box provided. All SSID values on your wireless network must
match. If you are unsure, use the default value of “linksys”. Then, click the
Next button.
3. The next screen to appear will be the Review Settings screen. Verify that
all the settings are correct and click the Next button to continue.
1. If you have chosen Ad-Hoc mode, the following screen will appear. If you
have chosen Infrastructure mode, refer to the previous section.
You will be prompted to choose a Channel from the list provided. All
computers on your wireless network must be using the same channel in
order to communicate with each other. If you are unsure about which chan-
nel to use, select the default channel (Channel 6). Once you have chosen
your channel, click the Next button.
Ad-Hoc Mode