Linksys WDT11 User Manual

Page 14

PCI Adapter

1. Windows 2000 will automatically identify the Network PC Adapter, once it

is connected to the PC, and prompt you to install the necessary driver. Make
sure that the Setup Utility CD (included) is inserted into your CD-ROM
drive and click the Next button on the Found New Hardware Wizard screen
to proceed.

2. Select Search for a suitable driver... and click the Next button. This will

search for the Windows 2000 driver.

Instant Wireless

Series

6. You will now reach the

screen shown here. This is
called the

Properties

screen. Please check with
your other wireless comput-
ers for the proper settings.
For more information con-
cerning these settings, refer
to the section called
Configuring the Network
PC Card for Windows NT.
Adjust the settings as are
appropriate and click the
OK button.

7. The PCI Adapter has now

been installed. You will see it
added onto this screen. Click
the Close button to continue
and then restart your comput-
er. Once your computer has
restarted, you can continue on
to the Configuration Utility
section.

Installing the PCI Drivers for Windows 2000

NOTE: After you have installed the PCI Adapter, reapply the

Windows NT service pack.