Linksys WDT11 User Manual

Page 21

PCI Adapter

Instant Wireless

Series

8. Select Power Save Mode and

select either “Enabled” or
“Disabled”. “Disabled” will
allow for uninterrupted data
communication. Selecting
“Enabled” allows your note-
book to enter “sleep” mode
and could interrupt data com-
munication. For further infor-
mation about Power Save
Mode, see the chapter entitled
Configuration Utility.

9. The setting for Use Wep

should be either “Disabled”
or “Mandatory”. Wired
Equivalent Privacy (WEP) is
an encryption scheme used to
protect wireless data commu-
nication. The “Disabled” set-
ting prevents the sharing of
data with other computers on
a WEP Network. For data
sharing to be enabled, select
“Mandatory”.

6. RTS Threshold

should

remain Disabled as set by
default. Do not change the
setting of the RTS Threshold
unless connection quality is
poor. Then, increase this set-
ting by the smallest value first
to establish a better connec-
tion.

7. Fragmentation Threshold

should remain Disabled as set
by default. Do not change the
setting of the Fragmentation
Threshold unless connection
quality is poor. Then, increase
this setting by the smallest
value first to establish a better
connection.