Lanier 1027 - Manual (Page 55)

Basic Functions
43
2
- - - -Rotated copy
If the direction in which your original is placed ( L or K ) is different from that
of the paper you are copying onto, this function rotates the original image by 90
°
and fits it on the copy paper. This function works when Auto Paper Select or
Auto Reduce/Enlarge is selected.
⇒ "Auto Paper Select" on p.41 “Selecting
Copy Paper” and
⇒ p.44 “Auto Reduce/Enlarge”
Limitation
❒ The default setting for "Auto Tray Switching" is "With image rotation ". You
cannot use the Rotated Copy function if this setting is changed to "Without
image rotation" or "Off".
⇒ p.184 “Auto Tray Switching”
❒ You cannot use the Rotated Copy function when enlarging onto B4 or A3 size
paper. In this case, place your original in the L direction.
❒ You cannot use the Rotated Copy function when "Left 2" or "Top 2" is selected
for stapling when using the 1000-sheet finisher.
⇒ p.51 “Staple”
❒ You cannot use the Rotate Copy function if the Staple function is selected
when using the 500-sheet finisher.
Original
Orientation Paper Orien-
tation Copy Orien-
tation
Original Size and Direction Copy Paper Size and Direc-
tion
You cannot
rotate: A4,
B5, or
A5
K
When enlarg-
ing to
→
B4, A3
However, you
can use: A4,
B5, or
A5
L
When enlarg-
ing to
→
B4, A3
GCROTA0E
R
R
GCROTA1E
R
GCROTA2E
R
GCROTA3E
R
GCROTA4E
R