Maintaining your machine, Cleaning the exposure glass, Cleaning the exposure glass cover – Lanier 1027 User Manual
Page 222: Cleaning the document feeder, 5maintaining your machine
REMARKS
210
5
Maintaining Your Machine
If the exposure glass, exposure glass
cover, or document feeder belt is
dirty, you might not be able to make
copies as you want. Clean them if you
find them dirty.
❖
❖
❖
❖ Cleaning the machine
Wipe the machine with a soft,
damp cloth. Then, wipe it with a
dry cloth to remove the water.
Important
❒ Do not use chemical cleaner or or-
ganic solvent, such as thinner or
benzene. If they get into the ma-
chine or melt plastic parts, a failure
might occur.
❒ Do not clean parts other than those
specified in this manual. Such
parts should be cleaned by your
service representative.
Cleaning the Exposure Glass
Clean 1 and 2
Cleaning the Exposure Glass
Cover
Cleaning the Document Feeder
Clean 1 and 2
This manual is related to the following products: