Lanier 1027 - Manual (Page 226)

REMARKS
214
5
Important
❒ Remove the photo conductor unit keeping the unit parallel to the ground
as shown in the illustration. Otherwise, the toner in the unit might scatter.
❒ Do not touch the inside of the unit or the green parts, after the black pro-
tection sheet is removed.
IIII
Align the new photo conductor unit onto the rail of the machine. Slide the
unit all the way into the machine.
JJJJ
Push the unit into the machine until it clicks into place.
KKKK
Remove the red sheet from the photo conductor unit and remove the two
pieces of tape.