Life Fitness GS2 - Manual (Page 9)

9
S
TEP
6:
• Using hammer tap one 5/16 X 2” ROLL PIN (47)
thru LEFT PRESS HANDLE (7) until it is flush with
other side of HANDLE as shown in FIGURE 6
• Repeat STEP 6 for the RIGHT PRESS ARM
HANDLE (6)
S
TEP
7:
• Place LEFT PRESS HANDLE (7) onto
PRESS ARM (8). Place PRESS ARM
SPACER (65) as shown over 5/6 x 2
ROLL PIN (47), make sure that the
5/16 X 2” ROLL PIN (47) passes into
the slot located in the plate of the
PRESS ARM (8)
• Once in place secure and tighten the
LEFT PRESS HANDLE (7) to PRESS
ARM (8) using one 3/8” WASHER (36)
and one 3/8” LOCK NUT (34)
• IMPORTANT! Do not overtighten:
PRESS ARM should rotate freely
• Repeat STEP 7 for the RIGHT PRESS
ARM HANDLE (6)
6 7
47
F
IGURE
6
8
7
36
34
47
6
65
F
IGURE
7
Note: Place PRESS ARM (8) upside down on
floor as shown to complete this step.
HANDLES (7) MUST BE PLACED
TOWARDS INSIDE OF PRESSARM
FLUSH SIDE
0 1 2 3 4 5 6
1/2 1/2 1/2 1/2 1/2 1/2