Lexmark 2500 - Manual (Page 18)

Button Function
6 Tear Off Alternates the paper between Tear Off and Top-Of-Form
7 Start/Stop Communicates the on/off status of the printer
Layer 2 control panel buttons
Button Function
1 LineFeed Advances the paper one line. Press and hold LineFeed to advance the paper 5 micro movements, and
then go into continuous feed.
2 Macro To support different styles of pre-printed forms, selects between four document formats
3 Setup Press to enter Setup mode. Lets you change the default values and modes of printer operation.
4 Micro Feeds the paper downward in small incremental movements. Press and hold to select continuous feed.
5 Pitch Sets the character pitch to: 10 cpi, 12 cpi, 15 cpi, 17 cpi, 20 cpi, or proportional spacing
Notes:
• On 2590/2591 models, you can also select 24 cpi.
• Fast Draft supports only 10, 12, and 15 pitch.
6 Micro Feeds the paper upward in small incremental movements. Press and hold to select continuous feed.
Using the control panel
18