beautypg.com

Administration > backup & restore, Administration > factory defaults, Advanced configuration – Linksys WAG325N User Manual

Page 29: Ping test, Backup configuration, Restore configuration, Factory defaults

background image

Chapter3

Advanced Configuration

28

Wreless-N ADSL2+ Gateway

Ping Test

Ping Test Parameters

The ping test checks the status of a connection.

Png Target IP

Enter the IP address that you want to

ping. This can be either a local (LAN) or Internet (WAN) IP

address.

Png Sze

Enter the packet size you want to use. The

default is 0 bytes.

Number of Pngs

Enter how many times you want to

ping. The default is 1.

Png Interval

Enter the number of milliseconds between

pings. The default is 1000 milliseconds.

Png Tmeout

Enter the number of milliseconds before the

ping test will time out. The default is 000 milliseconds.

Start Test

To run the test, click this button. The Ping Test

screen will show if the test was successful. Click Close to

return to the Diagnostics screen.

Diagnostics > Ping

Png Result

The results of the ping test are displayed.

Click Save Settngs to apply your changes, or click Cancel

Changes to cancel your changes.

Administration > Backup & Restore

The Backup & Restore screen allows you to back up or restore

the Gateway’s settings using a configuration file.

Administration > Backup & Restore

Backup Configuration

Backup

To save the Gateway’s settings in a configuration

file, click this button and follow the on-screen

instructions.

Restore Configuration

To use this option, you must have previously backed up its

configuration settings.

Please select a fle to restore

Click the Browse button

and select the Gateway’s configuration file.

Restore

To restore the Gateway’s configuration settings,

click this button and follow the on-screen instructions.

Administration > Factory Defaults

The Administration > Factory Defaults screen allows you to

restore the Gateway’s configuration to its factory default

settings.

Administration > Factory Defaults

NOTE:

Restoring factory defaults deletes custom

settings. Note your custom settings before

restoring the factory defaults.

Factory Defaults

Restore Factory Defaults

To reset settings to the

default values, click this button and follow the on-screen