Linksys WAG325N - Manual (Page 23)

Chapter3
Advanced Configuration
22 Wreless-N ADSL2+ Gateway
To create a policy, follow steps 1-11. Repeat these steps to
create additional policies, one at a time.
Select a number from the Internet Access Policy drop-
down menu.
To enable this policy, select Enable.
Enter a Policy Name in the field provided.
Click Edt Lst of PCs to select which computers will be
affected by the policy. The Internet Access PC List screen
appears. You can select a computer by MAC address or
IP address. You can also enter a range of IP addresses
if you want this policy to affect a group of computers.
After making your changes, click Save Settngs to
apply your changes, or click Cancel Changes to cancel
your changes. Then click Close.
Internet Access PC List
Select the appropriate option, Deny or Allow,
depending on whether you want to block or allow
Internet access for the computers you selected on the
Internet Access PC List screen.
Decide which days and what times you want this policy
to be enforced. Select the individual days during which
the policy will be in effect, or select Everyday. Then
enter a range of hours and minutes during which the
policy will be in effect, or select 2 Hours.
You can block websites with specific URL addresses.
Enter each URL in a separate Website Blocking by URL
Address field.
You can also block websites using specific keywords.
Enter each keyword in a separate Website Blocking by
Keyword field.
1.
2.
3.
4.
5.
6.
7.
8.
You can filter access to various services accessed over
the Internet, such as FTP or telnet.
From the Blocked Services list, select the service you
want to block. The port numbers and protocol for the
selected service are automatically displayed.
If the service you want is not listed, select User-
Defned. Enter its port numbers in the fields provided.
Then select its protocol: ICMP, TCP, UDP, or TCP &
UDP from the drop-down menu.
Click Save Settngs to save the policy’s settings. To
cancel the policy’s settings, click Cancel Changes.
Applications and Gaming > Single Port
Forwarding
The Single Port Forwarding screen allows you to customize
port services for common applications.
When users send these types of requests to your network via
the Internet, the Gateway will forward those requests to the
appropriate servers (computers). Before using forwarding,
you should assign static IP addresses to the designated
servers.
Applications and Gaming > Single Port Forwarding
Single Port Forwarding
To forward a port, enter the information on each line for
the criteria required.
Applcaton Enter the name you wish to give the
application. Each name can be up to 12 characters.
External and Internal Port Enter the external and
internal port numbers.
Protocol Select the protocol used for this application,
either TCP or UDP.
9.
10.
11.