Life Fitness Peak Pilates Reformer - Manual (Page 48)

Peak PilateSystem Owner’s Guide 45
Chapter 6: Maintaining the Peak PilateSystem
You have purchased a high quality piece of equipment that is constructed of the finest components
and materials. Proper maintenance requires only a small, but very important investment of your time
in a regular routine maintenance program.
The following assortment of basic tools is required to service our equipment:
• Allen Wrench sizes 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, and 6 mm
• Open End Wrench sizes 7 mm, 10 mm, 12 mm, 13 mm, and 15 mm
• Standard size Philips Head screwdriver
If you are using the equipment in a studio or club environment, we strongly suggest the following
maintenance program.
Inspect
• Overall machine – We highly recommend that you visually inspect the machine daily and that you
thoroughly inspect all the hardware to make sure every nut, bolt and fastener is secure every 2
months.
Part Daily Weekly
Bi-
Monthly
Annually
As
Needed
INSPECT
Overall Machine
√
Springs
√
Safety Chain and Clips
√
Tracking System (Carriage rollers and
inside of rails) √
CLEAN
Frame
√
Upholstery
√
Tracking System
√
REPLACE
Springs
√
Ropes
√
Foot Loops
√
Handles
√
Safety Clips
√