Life Fitness Peak Pilates Reformer - Manual (Page 22)

Peak PilateSystem Owner’s Guide 19
Assembling the Tower (Deluxe Model only)
1. Place the Tower on the Head End of the machine.
2. The side of the Tower with the 3 lower eye bolts should face the Foot End of the machine.
Assemble the Tower with 8 M6 x 35 mm screws using a 5 mm Allen wrench.
Assembling the Leg Springs (Deluxe Model only)
To assemble the Leg Springs (544 mm (21.4 in) long):
1. Attach the open end of the Double Ended Clip to the
ring on the Foot Loop.
2. Store the Leg Spring by hooking it to the lower eye
bolt located in the back of the Tower.
3. Repeat for the second spring.
Leg Spring
Foot Loop