Life Fitness Peak Pilates Reformer - Manual (Page 24)

Peak PilateSystem Owner’s Guide 21
Assembling the Ropes
To assemble the Ropes:
1. Hook the Double Ended Clip on the rope to the ring
on the Neoprene Handle.
2. Feed the other end of the rope through the Pulley on
the Riser Assembly (also called Riser).
Note: Make sure both of the Risers are in the same of the
7 preset positions.
3. Feed the rope through the metal loop and cam of the
cleat, adjusting to the desired length.
4. Drop the excess length of rope into the hole next to
the cleat.
5. Repeat this procedure for the rope on the other side.
Note: Make sure both ropes are adjusted to equal lengths
when the Risers are at the same height.