Linksys RV0041 - Manual (Page 87)

79 Appendix C: Physical Setup of the Router
Setting up the Router
10/100/1000 4-Port VPN Router
Wall-Mounting the Router
The Router has two holes on the bottom for wall-mounting. The horizontal distant between the two holes is 3.701
in (94mm). Install two screws or nails into the wall, 3.701 in (94 mm) apart. After the nails are secured on the
wall, line up the Router’s holes with the screws on the wall to wall-mount it. The suggested mounting hardware is
shown in Figure D-4.
Figure C-3: Wall-Mounting the Router