Linksys RV0041 - Manual (Page 63)

55 Chapter 5: Setting Up and Configuring the Router
Wizard Tab
10/100/1000 4-Port VPN Router
Wizard Tab
Use this tab to access the Router’s two Setup Wizards: the Basic Setup Wizard and the Access Rule Setup Wizard.
They will help you to set up the Router to access the Internet and set up a Firewall security policy, or Access Rule.
Basic Setup
1. Click the Launch Now button to run the Basic Setup Wizard to quickly set up the Router to access the
Internet.
2. From the first screen a WAN interface. Select RJ-45 (10/100) to use the port as a WAN port or select SFP
(MiniGBIC) to use the port for 10/100 networking. Click Next to continue. Click Exit if you want to exit the
wizard.
3. The information on the next screen is used if your Internet Service Provider (ISP) requires a host and domain
name. Complete this information, if required by your ISP, and click Next to continue. Click Previous if you
want to return to the previous screen. Click Exit if you want to exit the wizard.
Figure 5-52: Wizard tab
Figure 5-53: Basic Setup Wizard -
RJ-45 or SFP (MiniGBIC)
Figure 5-54: Basic Setup Wizard -
Host and Domain Name