Linksys WAG200G - Manual (Page 27)

Chapter4
Advanced Configuration
2 Wreless-G ADSL Home Gateway
ARP/RARP Table
ARP/RARP Table
An ARP request is a request sent by the Gateway
asking local network devices with IP addresses for
their MAC addresses, so the Gateway can map IP
addresses to MAC addresses. RARP is the reverse of
ARP. (This data is stored in temporary memory and
changes periodically.) To retrieve the most up-to-date
information, click Refresh. To exit this screen and
return to the Local Network screen, click Close.
Status > Wireless Network
The Wireless Network screen displays information about
your wireless network.
Status > Wireless Network
Wireless Network
Frmware Verson The version number of the firmware
is displayed.
MAC Address The wireless MAC address of the Gateway’s
local, wireless interface is displayed.
Mode The wireless network mode of the Gateway is
displayed.
SSID The wireless network name, which is also called the
SSID, is displayed.
DHCP Server The status of the Gateway’s DHCP server
function is displayed.
Channel The channel of the wireless network is
displayed.
Encrypton Functon The wireless security method is
displayed.
Wreless Clents Connected Click this button to view a
list of wireless clients connected to the Gateway.
Connected Wireless Clients
Connected Wireless Clients
The list of wireless devices displays Computer Name, IP
Address, and MAC Address. To retrieve the most up-to-
date information, click Refresh. To exit this screen and
return to the Wireless screen, click Close.
Status > DSL Connection
The DSL Connection screen displays information about
your DSL connection.
Status > DSL Connection
DSL Connection
DSL Status The status of the DSL connection is
displayed.
DSL Modulaton Mode The DSL Modulation Mode
selected on the Basic Setup screen is displayed.
DSL Path Mode The DSL Path Mode is displayed.
Downstream Rate The download speed of traffic from
the Internet to the Gateway is displayed.