Lowrance electronic Lowrance iFINDER Hunt - Manual (Page 49)

41
Press
↑ or ↓ to change the first character, then press → to the next
character and repeat until the name is correct. Then, press ENT |
↓ to
S AVE
| ENT .
The unit will display first a progress then a completion message when
the data transfer is finished. To return to the Page view, press
EXIT | EXIT .
These figures (from left to right) show the menu sequence for naming
and saving a GPS Data File from an MMC into iFINDER's memory.
4. Loading: There may be more than one GPS Data File (*.USR) on the
card. To select a file, press
ENT to activate the selection box, use
↓ or ↑
to highlight the file, then press ENT to accept the selection. Next, press
↓ to
L OAD
| ENT . The unit will display a completion message when the
data transfer is finished. To return to the Page view, press EXIT | EXIT .
These figures (from left to right) show the menu sequence for loading a
GPS Data File from an MMC into iFINDER's memory.
Switch to Advanced Mode
To leave Easy Mode and switch to Advanced Mode:
1. Press MENU |
↓ to
A DVANCED M ODE
| ENT .
2. Unit asks Are you sure you want to enter Advanced Mode?
3. Select
Y
ES
and press ENT to switch the unit to Advanced Mode.