Lowrance electronic Lowrance iFINDER Hunt - Manual (Page 46)

38
Navigate Trail
menu.
Navigating or Backtracking a Trail
There are two methods for following your back trail. The simplest re-
quires no menu commands at all, but provides no navigation informa-
tion during the trip, such as the time to your destination. The other
requires only three keystrokes and provides a full range of navigation
data. Try both methods and see which you prefer. When hiking at
walking speed, we often just use visual back trailing because it is better
at following each little turn on a footpath. At faster speeds, like travel-
ing on the highway or cruising on the water, the Navigate Trail com-
mand is handy.
Visual Back Trailing
1. On the Map Page, zoom (
ZIN or ZOUT ) so your trail is visible.
2. Begin moving and watch the Map Page (or Navi-
gation Page, if you prefer). Walk or steer so that
your current position arrow traces along the trail
you have just made.
Navigate a Back Trail
1. Press
MENU |
↓ to
N AVIGATE T RAIL
| ENT .
2. Begin moving and let your iFINDER guide you.
NOTE:
If you are already located at or near the begin-
ning of your back trail, the arrival alarm will
go off as soon as you hit Enter. Just press
EXIT
to clear the alarm and proceed.
Navigate trail, map views: Driver is southbound heading straight to-
ward trail point 6 (left); steer arrow says steer straight. Southbound
driver (right) has reached point 6 and must turn east to follow trail.
Steer arrow swings around to say turn left (east), toward the next trail
waypoint (arrival alarm message turned off for clarity.)
Back trail
dotted line
Trail point
Steer arrow
Present
position
arrow
North