Lenovo X200 User Manual
Page 111
Table 16. Removal steps of palm rest (continued)
When installing:
When you attach the palm rest, do as follows:
1. Attach the touch pad connector firmly to the system board.
2. Press the left and right top edges of the palm rest to fit it into place.
3. Push the front side of the palm rest until it clicks into place.
1
2
2
1
4. Close the LCD cover and turn the computer over. Then fasten the five screws
to secure the palm rest.
Removing and replacing a FRU
103
This manual is related to the following products: