Lexmark Z45 - Manual (Page 92)

92 Troubleshooting
Lexmark Z45
Printer overview
Basic printing
Printing ideas
Maintenance
Troubleshooting
Notices
Index
Using this
Guide...
www.lexmark.com
Test page does not print
For help, first see Solving general printing problems , then:
• If the paper is jammed, see Clearing paper misfeeds or jams .
• Make sure the printer is not being held or paused. To check the printer status:
a From your desktop, double-click the Lexmark Z45 printer icon.
b Make sure the Hold button is not selected.
c Try printing your test page again. If it still does not print, see:
– Resolving unsuccessful or slow printing
– Solving printer software installation problems
– Solving network printing problems
Printer ejects a blank page after appearing to print
Make sure:
• You remove the sticker and transparent tape from the back and bottom of the print
cartridges. For help, see
Replacing the print cartridge .
• Your cartridge does not have clogged nozzles. Try Cleaning the print cartridge
nozzles .