Lynx Professional Grills 27" Free Standing Grill L27PSR-2 - Manual (Page 17)

17
lynx products are known for
their attractive appearance.
we achieve this by selecting
only the finest grades of
stainless steel and applying
exacting workmanship.
in order to maintain this at-
tractive appearance over the
life of the grill it is important
to take the following steps:
► after each use wipe down
the exterior of the grill to
remove grease and splatters.
► Be sure to follow the
cleaning instructions for
keeping the grates and
burners clean and ready for
use.
► use a commercially
available stainless steel
cleaner to clean and polish
the exterior surfaces.
doing these things on a
regular basis minimizes the
amount of effort required.
part of the appeal of your lynx
Grill is the fine grain finish.
when removing stubborn
stains:
► do not use metallic
abrasives and always rub in
the direction of the grain.
► some household cleaning
products are not suitable for
stainless steel; be sure to read
the label before using on your
lynx grill.
► always use the mildest
cleaning solution first,
scrubbing in the direction of
the grain. specks of grease
may gather in the grain of the
stainless steel and bake on to
the surface, giving the appear-
ance of rust.
to remove these baked-on
foods use a fine to medium
grit non-metallic abrasive pad
(scotch Brite is good) in con-
junction with a stainless steel
cleaner.
► solutions used for
cleaning concrete and
masonry can be very
corrosive and will ‘attack’
stainless steel. ensure your
lynx products are well
protected before you allow
the use of such chemicals
near your grill.
specIal note for
locatIons near pools
and coastal areas
the 304 stainless steel
material used in the con-
struction of a lynx grill is
highly rust resistant, however,
chlorine in the air from
swimming pools or the salt
from sea air may cause surface
rust to appear and even
create some pitting if left on
the product.
here are a few tips to avoid
this:
► Regularly wipe down the
exterior surfaces with a damp
cloth. (Micro fiber cloths such
CLEANING YOUR LYNx GRILL
as ecloth perform very well).
► allow the surfaces to dry
before installing the cover.
–do not cover a damp grill.
► in extreme environments
apply a rust inhibitor which
leaves a microscopic protec-
tive layer on the grill. products
that provide a layer of vapor
corrosion inhibitors (Vpci™)
protect the surface very well.
► for seasonal storage use
the product referred to above,
ensure the grill is dry and then
cover and secure the cover to
minimize the amount of damp
air getting to the surfaces.
the lynX limited life time
waRRanty pRoVides pRo-
tection against Rust
thRough of paRts that
RendeR the pRoduct
inopeRatiVe. it does
not coVeR occasional
suRface Rust oR staining
due to enViRonmental
conditions.
After your first use certain
areas of the grill may discolor
from the intense heat given off
by the burners - this is normal
and cannot be cleaned off.
for light and heavy food
stains there are many different
stainless steel cleaners
available.
drIp tray
the drip tray should be
cleaned after each use. after
the grill is completely cool,
remove the drip tray by
pulling it out until it stops,
then lifting the front edge
until the drip tray comes free.
staInless steel