Lynx Professional Grills 27" Free Standing Grill L27PSR-2 - Manual (Page 12)

12
manual lIgHtIng
if a burner doesn’t light after
several attempts, it can be
match lit using the lighting rod
stored in the drip tray.
match-lighting your grill is
done in one of three ways,
depending upon which
burners are being lit.
first, make sure you’ve
returned all of the control
knobs to the off position
and have allowed 5 minutes
for any accumulated gas to
dissipate before attempting to
match light a burner.
manual lIgHtIng tube
your grill features individual
manual lighting tubes for all
main burners except for the
right-most main burners.
cold WeatHer
WarnIng: propane
extremely cold temperatures
may cause your prosear™
2 burner to light inside
the burner instead of out-
side . once lit, if you hear a
‘whooshing’ sound, imme-
diately turn the burner knob
off to extinguish the flame
and then immediately re-
light the burner.
using the lighting rod, place a
lit match in front of the manual
lighting tube for the burner
you wish to light. (see photo)
push and turn the correspond-
ing burner control knob to
“lite”. if the burner doesn’t
light within 5 seconds turn the
knob off and wait 5 minutes
before attempting to light it
again. once lit, gas will stop
flowing through the manual
lighting tube.
rIgHt-most maIn burner
the right-most main burner,
does not feature a manual
lighting tube.
to match-light this burner, use
the lighting rod to insert a lit
match through the cooking
grate into the front slot of the
briquette tray for that burner.
push and turn the correspond-
ing burner control knob to
“lite”. if the burner doesn’t
light within 5 seconds turn the
knob off and wait 5 minutes
before attempting to light it
again.
prosear™ 2 burner
the prosear™ 2 burner, does
not feature a manual lighting
tube.
to match-light this burner, use
the lighting rod to insert a lit
match through the cooking
grate and through the protec-
tive screen.
push and turn the correspond-
ing burner control knob to
“lite”. if the burner doesn’t
light within 5 seconds turn the
knob off and wait 5 minutes
before attempting to light it
again.