Step 7: verify camera image, Step 8: set the time, Accessing system information – LOREX Technology LH330 EDGE2 User Manual

Page 26: Default system passwords, Step 7: verify camera image step 8: set the time

Getting Started

Step 7: Verify Camera Image

• Power on the cameras, and then verify the camera video quality before permanently mounting

the cameras.

• Mount the cameras under a sheltered location. Always verify the environmental rating of your

cameras before permanent installation outdoors.

Step 8: Set the Time

• Set the system time for accurate video timestamps. Videos with inaccurate times may not be

valid as surveillance evidence.

• For details on setting the system time, see “Setting the Date and Time” on page 19.

Accessing System Information

• To quickly open a window that displays vital system information, press the

button on the

front panel of the DVR.

button - 

Press to access system information

button - Press to exit

system information

Press

to exit the System Information window.

Default System Passwords

• The DVR requires a user name (ID) and password to log in remotely using a computer or

mobile device.

• The HTTP port (default 80) must be port forwarded on your router to access the DVR over the

Internet or a local network.

Refer to the following tables for the default account user names and passwords for the
DVR.

Level

User ID

Password

USER1

1111

USER2

2222

ADMIN

3333