LOREX Technology LH330 EDGE2 - Manual (Page 72)

Add/ Configure
DVR
Open/refresh
connection
Close
connection
Select DVR
Client window
54
Setting up your DVR for Remote Connectivity
2 Click DVR List. The DVR List window opens.
DVR List
3 Click Add.
4 Configure the following:
• Name: Enter the name you would like to use for
your DVR. You can use your name, your company
or business name, or anything of your choice.
• IP / DDNS: Enter the IP address from the System
Information window.
• Port: Enter the HTTP port (default: 80) from the
System Information window.
• ID: Enter the ADMIN ID for remote viewing
(default: 9).
• Password: Enter the ADMIN password for
remote viewing (default: 3333).
5 Click Change. Then click Close to return to the
main client window.
6 Select your DVR from the drop-down menu at the top of the screen and click to connect.
Live video from your cameras will appear when the connection is successful.
NOTE: If it does not connect within 30 seconds, click and click again to refresh
the connection.