LOREX Technology LH330 EDGE2 - Manual (Page 37)

19
Setting the Date and Time
It is highly recommended to immediately set the date and time
when first setting up your DVR.
Inaccurate time stamps may render your footage unusable as
court evidence.
To set the date and time:
1 Click to open the Main Menu.
2 Click to open the Setup Menu.
3 Click Date/Time Setup. The Date/Time
Setup Menu appears.
Date/Time Setup Menu
4 Configure the following:
• Date Mode: Scroll up / down to select the
date format you would like to use (Y/M/D,
D/M/Y, or M/Y/D). The Date field
automatically changes to the chosen
format when selected.
• Date Setup: Scroll up / down to manually
select the date.
• Time Setup: Scroll up / down to manually select the time.
NOTE: The DVR displays time in 24-hour format.
5 Click Exit/Update to save your settings. The system returns to the Setup Menu.
6 Right-click until all menus are closed. The date and time are displayed on the bottom-left
corner of the screen.
NOTE: The system does not automatically adjust the time for Daylight Savings Time.
Remember to change the time one hour ahead, or one hour backward, according
to Daylight Savings Time. When the time is set backwards, the system will retain
recorded data with overlapping time stamps.