Lennox Hearth MPD35ST-NM - Manual (Page 14)

NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.
14
Polished Brass & Brushed Stainless Hood Kits
Attractive hoods are available in two styles to be used
on the Multi-Open Series appliances. These hoods
are designed to be fi tted to the glass viewing sides of
the appliance. In addition to providing an aesthetically
pleasing appearance to your appliance installation,
the hood reduces heat effects to decorative mantles
and fi nish materials located above the fi replace
opening. The hood kit replaces the standard hood
that comes with these appliances and snaps into
place. These kits can be retrofi tted to previously
installed appliances.
ACCESSORY COMPONENTS
* 35" Eyebrow Hood Kits
Cat. No. Model No. Description
96K67 EB35PB
Hood Kit, Polished
Brass
88L49 EB35BS
Hood Kit, Brushed
Stainless
* These hood kits replace the standard hood that
comes with these fi replaces.
Door Frame Kits
A decorative door frame kit is available for use with
these appliances. It is designed to attach directly to
the front face of the appliance at the four edges of
the glass enclosure panel resulting in the appearance
of a picture frame.
4 Piece Door Trim Kits
Cat. No. Model No. Description
26M82 4DFK35PB Door Trim, Polished Brass
26M85 4DFK35BS Door Trim, Brushed Stainless
(ref. Form # 750,098M)
(ref. Form #504,142M)
Forced Air Kit
The FBK-100 blower provides constant velocity forced
air circulation. The FBK-200 assembly with variable
speed, wall-mountable switch provides variable speed
forced air circulation. The FBK-250 assembly with
variable speed unit-mountable switch, also provides
variable speed forced air circulation.
Forced Air Blower Kits
Cat.
No.
Model No. Description
80L84 FBK-100 Blower, Standard
(single speed)
80L85 FBK-200 Blower, Variable Speed
(w/wall-mounted switch)
80L86 FBK-250 Blower, Variable Speed
(w/unit-mounted switch)
94L89 FBK-100-36 Blower, Standard, 36 Pack
94L90 FBK-200-36 Blower Kit - Variable Speed
with Wall Switch 36 Pack
H0543 FBK-250-36 Blower Kit - Variable Speed
with Thermo Snap Switch
36 Pack
Screen Heat Guard Kit
This easy to install optional screen heat guard installs
over the standard glass enclosure panel to provide
protection from the hot glass surface. These screen
heat guard panels cannot be used in conjunction
with the arch door kits or door frame kits. Order 2
if a set is desired (for front face and rear face glass
surfaces).
* 35" Screen Heat Guard Kit
Cat. No. Model No. Description
26M48 HG35M 35" Screen Heat Guard Kit
* Order 2 for set if desired.
(ref. Form # 750,028M & 750,029M)
(ref. Form # 750,101M)
Arch Door Kits
Two types of arch door kits are available for the Multi-
Open Series. Both types of kits are easy to install
and do not require hardware to attach them to the
standard door frame. These kits can be retrofi tted to
previously installed Multi-Open Series appliances. The
decorative arch kits can not be used in conjunction
with the screen panel kit.
* 35" Arch Door Kits
Cat. No. Model No. Description
26M43 ADK35CMPB Arch Door, Polished Brass
26M44 ADK35CMBS Arch Door, Brushed Stainless
* Order 2 for set if desired.
(ref. Form # 750,021M)
Touch-Up Paint Kit
Repair of minor scratches and discoloration of the
appliance charcoal painted surfaces may be accom-
plished with the touch-up paint kit.
Touch-Up Paint Kits
Cat. No. Model No. Description
90L74 TPK-C Touch-Up Paint (Charcoal)
98K67 TPK-T Touch-Up Paint (Tan)
(TPK-C ref. Form # 504,216M)
PA I N T