Lifescan OneTouch Basic Basic Blood Glucose Monitoring System - Manual (Page 68)

MESSAGE APPEARS WHEN
A control solution test has been completed. (If you have just
performed a blood glucose test, this means that the blood
sample was too small and the meter read it as control solution.
Repeat the test with a new test strip and a larger drop of
blood.)
You are performing a check strip test. Turn the check strip over
and insert Side 2.
The check strip test result falls into the acceptable
range. The check strip range is printed on the back of your
meter. 80 mg/dL
(Example)
A o k
insert
side 2
100 mg/dL
(Example)
contrl
60
DCO_06331801A_OTB_OB_US 11/25/03 3:27 PM Page 60