Lifescan OneTouch Basic Basic Blood Glucose Monitoring System - Manual (Page 63)

Unit of Measure
The meter is set to display test results
in milligrams per deciliter (mg/dL), the
standard unit used in the United States.
You have the option to change to
millimoles per liter (mmol/L), commonly
used in Canada and parts of Europe.
To change the unit of measure, enter the
set-up mode (see page 47). Use the
M button to choose the Unit of
Measure option. Press the C button to
change the unit of measure. You may
55
now press the M button to review or
change any of the options you have
chosen or press the on/off button to
turn the meter off.
Decimal Separator
The meter is set to display millimoles
per liter (mmol/L) using a decimal
point. This option allows you to select a
comma instead of a decimal point as a
decimal separator.
Note: The Decimal Separator
option appears only if you have
selected mmol/L as your unit
of measure.
DCO_06331801A_OTB_OB_US 11/25/03 3:27 PM Page 55