Lifescan OneTouch Basic Basic Blood Glucose Monitoring System - Manual (Page 67)

MESSAGE APPEARS WHEN
The meter is performing internal checks.
The meter is ready to receive a blood or control solution
sample. If performing a check strip test, this is your signal to
remove the check strip from the meter.
The meter is counting down from 45 seconds to 0.
A blood test has been completed. This indicates a blood
glucose result when the meter is set for mg/dL.
A blood test has been completed. This indicates a blood
glucose result when the meter is set for mmol/L, the unit of
measure used in Canada and parts of Europe. 6.1 mmol/L
(Example)
108 mg/dL
(Example)
45 . . . . . 0
apply
sample
wait
59
DCO_06331801A_OTB_OB_US 11/25/03 3:27 PM Page 59