Using the printer control panel – Lexmark S600 User Manual
Page 6
Use the
To
11
Paper feed guard
Prevent items from falling into the paper slot.
2
1
8
7
4
3
5
6
Use the
To
1
Scanner lid
Access the scanner glass.
2
Scanner glass
Scan and copy photos and documents.
3
USB port
Connect the printer to a computer using a USB cable.
Warning—Potential Damage: Do not touch the USB port except when
plugging in or removing a USB cable or installation cable.
4
Power supply with port Connect the printer to a power source.
5
Duplex unit
•
Print on both sides of a sheet of paper.
•
Remove paper jams.
6
Printhead access
Install the printhead.
Note: The carrier moves to the printhead access area when no printhead
is installed in the printer.
Use the
To
7
Ink cartridge access
Install, replace, or remove ink cartridges.
8
Scanner unit
•
Access the ink cartridges and printhead.
•
Remove paper jams.
Using the printer control panel
The following diagrams explain the sections of the printer control panel:
Note: The icons are displayed when they are selectable on the current screen. If an icon is not displayed,
then the function is not available.
1
2
4
5
6
7
3
Use
To
1
Power
•
Turn the printer on and off.
•
Switch to Power Saver mode.
Note: When the printer is on, press
to switch
to Power Saver mode. Press and hold
for three
seconds to turn off the printer.
2
Back
•
Return to the previous screen.
•
Exit from one menu level to a higher one.
3
Touch screen display
Note: The display is turned off in Power Saver
mode.
•
Navigate the printer menus.
•
Change settings.
•
View printer messages and animation.
6